tengbo168手机版_tengbo9887.com

高精度成形磨削用金刚石修整滚轮Diamond Dressing Rollers for High Precision Form Grinding

  • 发布时间:2019-10-01
  • 浏览:

高精度成形磨削用金刚石修整滚轮.jpg

产品概述

公司采用内镀法生产的高精度滚轮,可以制作R0.1 小圆弧面、小于1mm 齿距的多齿复杂型面滚轮及高径比大于1.5、高度大于200mm 的强力磨削用大型面滚轮,产品轮廓精度高,是高精度、高效成形磨削的修整工具。

公司采用外镀法生产的各类滚轮,用于陶瓷CBN 砂轮、内圆磨头的修整,具有修整效率高、直线度好等特点。

Product overview

We can produce high precision dressing rollers with inner galvanizing (UZ) methods. For example, we can supply complica-ted multi-teeth rollers with small radius R0.1 and teeth distance less than 1mm and heavy grinding rollers with height more than 200mm and height diameter ratio bigger than 1.5.

Our dressing rollers produced with outer galvanizing methods are used for dressing vitrified CBN grinding wheels and int-ernal mounted points. Its features are high dressing efficiency and good straightness.

 

高精度成形磨削用金刚石修整滚轮3_副本.jpg

高精度成形磨削用金刚石修整滚轮4_副本.jpg

主要特点

修整效率高

型面一致性好

加工的工件质量稳定

Main features

High dressing efficiency

Good profile consistency

Stable workpiece quality

 

高精度成形磨削用金刚石修整滚轮5_副本.png

高精度成形磨削用金刚石修整滚轮6.jpg

应用领域与适用范围

广泛应用方向器螺杆、万向节、气门、轴承内外圈,凸轮轴、曲轴、连杆等诸多产品加工砂轮的修整。

Application

They are widely used for dressing the grinding wheels for processing screw of steering gear, universal joint, valve, bearing inner and outer raceway, camshaft, crankshaft and connecting rods and so on.

高精度成形磨削用金刚石修整滚轮7_副本.jpg

高精度成形磨削用金刚石修整滚轮Diamond Dressing Rollers for High Precision Form Grinding(图7)

高精度成形磨削用金刚石修整滚轮Diamond Dressing Rollers for High Precision Form Grinding(图8)

扫一扫,关注我们

服务热线

400-6608-121

Copyright © 2018-2019 tengbo168手机版 All rights reserved 版权所有 Powered by EyouCms

营业执照公示

豫ICP备05008669号-1